The American Pro® Rooftop Units AP.BDQTE-Q Series are specially designed and manufactured to meet the requirement of the Gulf’s severe climatic conditions and are built specifically for outdoor installations. The units are designed to fit all applications, they can also be slab mounted at ground level or set on steel beams above a finished roof. The air-cooled packaged rooftop units are designed to operate in a wide ambient temperature range between 60°F [15.5°C] to 125°F [52.0°C]. It is available in 50Hz & 60Hz with a cooling capacity range of [14 to 146kW] using R-22 or R407C/R410a refrigerant. The units are manufactured as per AHRI 210/240 and 340/360 standards. The AP.BDQTE-Q series with new features is suitable for Hotel, Office, Hospital, School, Factory, Villas and supermarket Apartments building, mall applications. The low noise and compact series are completely leak tested, evacuated, dehydrated and charged with refrigerant prior to shipment.Cooling Capacity from 14 - 146 kW (4 - 42 TR) 50/60Hz
SAFETY CONTROL
High-low pressure cutout to protect compressor from high discharge pressure
and system leakage.
FULLY LEAK TESTED REFRIGERANT CIRCUIT
Compressor, condenser coil, filter drier, sight-glass, thermo-expansion valve,
distributor and evaporator coil is brazed in complete sealed loop.
Leak and pressure tested at 450 psig.
Pressure ports are provided on the discharge, liquid and suction line.
Evacuated, dehydrated and charge with refrigerant gas prior to shipment.
CASING
Constructed from heavy gauge galvanized steel.
Panels are painted with epoxy powder paint for excellent nish, weather-ability and corrosion resistance.
Double skinned evaporator section insulated with 1” x 2 lb per.cu.ft of linacoustic berglass for
durability, reliability and lower noise.
EFFICIENT EVAPORATOR COIL
Independent thermal expansion valve with external equalizer for better refrigerant control and wider load condition.
Leak and pressure tested to 450 psig
Evacuated, dehydrated and charged with refrigerant gas.
Coil rated in accordance with AHRI Standard 410.
DRIVE PACKAGE AND BLOWERS
Belt driven drive package oers exibility on various air ow rate and various static pressure applications.
Single large diameter double inlet double width blowers (AMCA certified) reduce the noise level and
eliminates the need for common transition and eliminates air unbalance.
FILTERS
2” thick washable pleated filters with 75% arsenate efficiency as per ASHRAE Standard 52.1.
OPTIONAL ACCESSORIES FEATURES
Stainless Steel Drain Pan
Hot Gas Bypass
Evaporator Coil Fin Materials
Condenser Coil Fin Materials
Condenser Coil Guard
High and Low Pressure Gauges
Discharge / Suction / Liquid Line Service Valves
Filter Options
Electric Heater
Main Incoming Isolator
Phase Failure Relay
Thermostat / Temperature Controller
Crankcase Heater 24Vac Control Supply
Liquid Line Solenoid Valve (LLSV)
Electronic Expansion Valve (EEV)
Need Any Help, Call Us 24/7 For Support
San Dimas, USA